Landscape Bodies

Voth Landscape Bodies are made for heavy duty service, without turning your truck into an oversized dump truck. Our bodies are custom designed according to customer needs and specifications and have the same features as many other larger bodies without the bulk and size.

Features

  • One piece floor design with smooth understructure and low mounting height for low center of gravity and increased stability
  • Trunnion-mounted telescopic hoist or underbody scissor lift for maximized lifting power
  • Greaseable pivots, fittings, latches and hinges
  • D-rings inside all 4 corners of box
  • Tie down rails on sides and tailgate to secure tarps and loads
  • Tailgate dropdown safety chains, spreader chain holding retainer
  • LED lights

Specifications

FEATURE STANDARD OPTIONAL/CUSTOM
MATERIAL
  • 44W Steel
  • Aluminum
LENGTH
  • 9’9″ (2170lbs, 2.6 cubic yards, 7 ton hoist)
  • 11’9″ (2410lbs, 3.7 cubic yards, 7 or 12 ton hoist)
  • 12’9″ (2641lbs, 4.1 cubic yards, 7 or 12 ton hoist)
  • 13’9″ (2819lbs, 4.4 cubic yards, 12 ton hoist)
  • Custom
WIDTH
  • 96″ outside, 90.5″ inside
  • Custom
FLOOR
  • 3/16″ unibody design
  • 6″ sub-frame with no cross members
  • full depth rear corner posts tied to 6″ structural rear apron
  • 4″ sub-frame
SIDES
  • 14″ high
  • 12″9″ and 13″9″ come std with twin fold down sides
  • Manual locking latch
  • Double wall 12 gauge steel outer, 10 gauge inner
  • Formed top rail
  • 20″ high or custom
  • fold down
  • 10″ wood or 6″ aluminum side extenders
TAILGATE
  • 20″ two way with quick release handle
  • One-piece 12 gauge outer, 10 gauge inner
  • Doublewall sheet with full perimeter boxing
  • Flush-mount, offset tailgate hingeplates with easy release pins
  • 1″ top and bottom latch pins
  • 26″ two way
HEADBOARD
  • 54″ (varies to optimize fit on different chassis)
  • 10 gauge with aerodynamic integral cab shield
  • Pre-punched windows
  • 62″ or custom
HOIST
  • 3-stage trunnion mounted telescopic
  • Hydraulic plumbing and electric pushbutton controls
  • Underbody scissor lift
LIGHTING
  • Stop, turn and tail lights mounted in rear posts
  • ICC and rear clearance lights with reflectors
  • All lights are LED, rubber mounted and shock resistant
  • Custom
PUMP
  • 12V electric single pump
  • Power packs mounted to side of frame
  • 12V electric twin pump
  • Hydraulic power packs
  • PTO with transmission or clutch pump
  • Steel pump box enclosure with aluminum cover
FINISH
  • Steel – black (sandblasted/epoxy primer/polyurethane paint)
  • Aluminum – unfinished
  • Custom colours
ACCESSORIES  
  • Custom tool boxes
  • Aluminum tool/shovel racks
  • Tailgate gravel chutes
  • Fold out step ladders
  • Manual or electric tarp kits